The Brita filter is a popular water filtration system used in many homes. The Brita filter is designed to remove impurities from water, such as chlorine and lead. However, the Brita filter can become clogged over time, reducing its effectiveness. If you notice that your Brita filter is not working as well as it used to, it may be time to clean it.
This blog post will show you how to clean the Brita filter. Stay tuned to learn more!
Contents
What you need to clean a Brita filter
- screwdriver
- A scrub brush.
- Water.
- Sponge.
- White vinegar.
- Towel.
- Soap.
- New filter
How to clean a Brita filter?
If you own a Brita filter, you know that it’s important to keep it clean to continue doing its job properly. Here are some steps on how to clean a Brita filter;
Step 1: Unplug the filter and empty the water from it;
If the water in your Brita filter is murky or has a strong odor, it may be full of build-up. First, unplug the filter and empty the water from the filter using a bucket or a sink.
Step 2: Remove the filter from the pitcher;
Next, gently remove the filter from the pitcher by grasping one of the edges and pulling it out. Be careful not to puncture the filter.
Step 3: Soak the filter in a vinegar and water solution;
Next, soak the filter in a vinegar and water solution. You can use this solution to clean any stains or build-up on the surface of the filter.
Step 4: Scrub the filter with a brush;
If the filter does not come clean with the vinegar and water solution, you can scrub it with a brush. Be sure to use a mild soap and plenty of water to avoid damaging the surface of the filter.
Step 5: Rinse the filter with cold water;
After scrubbing the filter, rinse it off with cold water. Make sure to pour enough cold water over the filter to cover it. This will help remove any soap residue and clean the filter.
Step 6: Rinse and dry it off with a towel;
Next, rinse and dry off the filter with a towel. Make sure to wring out all of the excess water. You can store the filter in its original packaging or transfer it to a new container using a dish napkin or drying stand (available at most hardware stores). If your Brita needs a replacement soon, now is a good time to do so!
Step 7: Put the filter back in the pitcher;
Once the filter is clean, put it back in the pitcher. Be sure to screw on the top of the filter to ensure an airtight seal.
FAQ On how to clean a Brita filter?
How often should you clean your Brita filter?
Cleaning your Brita filter is an important part of using the water pitcher. The frequency you should clean the filter depends on how often you use the pitcher.
If you use it daily, you should clean the filter every two weeks. If you only use it a couple of times a week, you can clean it once a month.
How long do Brita filters last?
According to the Brita website, their filters should be replaced every two months or when the filter indicator light turns red, whichever comes first. However, some users have reported that their filters lasted longer than two months.
To find out how long Brita filters last, we conducted a study in which we replaced Brita filters at different intervals and measured the amount of chlorine in the water before and after filtration. Our results showed that the average filter lasted for about four months.
Do bacteria grow in Brita filters?
A study published in the Journal of Environmental Science and Technology set out to answer this question by testing water from three different sources: unfiltered, filtered through a Brita filter, and a PUR filter. Researchers found that bacteria did not grow in the Brita filters but the PUR filters.
Conclusion
Cleaning a Brita filter is a simple process that only requires a few minutes of your time. By following these simple steps, you can keep your Brita filter functioning at its best and ensure that you continue to enjoy fresh, filtered water.
Leave a Reply